Index
High precision 3D printer Formlabs Form 3+
Technical specification
| Manufacturer | Formlabs |
| Type | Form 3+ |
| Commissioning | Q4 2022 |
| Technology | Low Force Stereolithography (LFS) |
| Build volume (W ∗ D ∗ H) | 145 mm ∗ 145 mm ∗ 185 mm |
| Material | Various UV-curing model materials (also elastomers and ceramics) |
| Resolution | XY: 25 µm; Z: 25 µm |
| Data transfer | Network / USB |
| Software | Preform (slicing & process management) |
| Applications | Media-resistant and transparent components, mechanical end-use components |
Vacuum mixer
Technical specification
| Manufacturer | Renfert |
| Type | Twister Venturi |
| Vacuum max. | ≈-890 mbar |
| RPM | 100–450 U/min |
| Capacity | 500 ml |
2x Desktop 3D printer Prusa i3 mk3s
Technical specification
| Manufacturer | Prusa Research a.s. |
| Type | i3 mk3s |
| Commissioning | Q3 2019 |
| Technology | FFF (Fused Filament Fabrication) |
| Build volume (W ∗ D ∗ H) | 250 mm ∗ 210 mm ∗ 210 mm |
| Extruder | E3D v6 |
| Material | PLA, PETG (Open Filament System, Φ 1,75 mm) |
| Print speed | 200+ mm/s |
| Layer resolution | min. 0,05 mm |
| Data transfer | via SD-Card or PrusaSlicer |
| Software | PrusaSlicer |
| Features | Heated build platform; Removable magnetic print bed; Automatic bed leveling; Fault detection |
| Applications | Rapid prototyping; mechanical end-use components |
High precision 3D printer Keyence Agilista-3200W
Technical specification
| Manufacturer | Keyence Corporation |
| Type | Agilista-3200W |
| Commissioning | Q4 2017 |
| Technology | Multi-Material Ink-Jet |
| Build volume (W ∗ D ∗ H) | 297 mm ∗ 210 mm ∗ 200 mm |
| Material | UV-curing model material & water-soluble support material |
| Resolution | XY: 63,5 x 40 µm; Z: 15 µm |
| Data transfer | Own network interface |
| Software | Keyence Modeling Studio (slicing & process management) |
| Applications | Media-resistant, transparent components |
Direct Ink Writing silicone 3-D printer – F400
Technical specification
| Manufacturer | In-house development |
| Base | X400 Pro V3, innovatiQ |
| Start of operation | Q1 2021 |
| Technology | Direct Ink Writing (DIW) |
| Build volume (w ∗ d ∗ h) | 270 mm ∗ 350 mm ∗ 200 mm |
| Material | RTV-2 silicone, LSR |
| Data transfer | SD card / USB |
| Software | Pronterface |
| Field of usage | Silicone components for applications in medical technology or mechanical engineering |
Silicone Liquid Additive Manufacturing (LAM) system LiQ 5
Technical specification
| Manufacturer | innovatiQ GmbH + Co KG |
| Start of operation | Q2 2023 |
| Technology | Liquid Additive Manufacturing (LAM) |
| Build volume (w ∗ d ∗ h) | 250 mm ∗ 320 mm ∗ 150 mm |
| Material | Liquid Silicone Rubber (LSR) |
| Field of usage | Silicone components for applications in medical technology or mechanical engineering |